Produit fluide de réparation de fissures

Données Web du fournisseur

Extraits originaux en anglais. Vérifier avec les fiches technique et de sécurité à jour avant utilisation.

Ajouter à la liste de projet

Formats

28 Packaging | 7.56 L (2 US gal), 37.8 L (10 US gal)

Ratio de mélange

15 FLOWFILL is a two-component, solventborne polyurethane system. Its high penetration and fast setting allow for very quick repair of damaged joints, spalling, and cracks. Fillers such as sand or gravel can be added for repairing larger holes and defects. / 23 * Easy 1:1 mix ratio by volume / 31 Mix Ratio (by volume) | A:B = 1:1 (100:100) / 32 Mix Ratio (by weight) | A:B = 94:113 / 55 Surface Preparation / 57 New concrete must cure for a minimum of 30 days. It must reach at least 25 MPa (3625 psi) compressive strength and 1.5 MPa (218 psi) tensile strength. Mechanical preparation is required to remove surface laitance. / 59 Mix each component separately. Pour Part B into Part A using the proper ratio. Mix both components for no more than 20 seconds. Only prepare the amount that can be applied within the pot life.

Source originale iCoat

Prix, stock, TDS et SDS à confirmer.